Re: [Jack-Devel] Netjack client on windows

hi there,
i'm not infront of my win7 64bit jack client right now,
but could you please try the following:

after you download the latest versions (i think it is 1.9.9.4 right
Stephane?)
start server as you did.
then in win7 client,
use jack command line to open a command prompt in jack installation folder
in "program files (x86)".
start jack server with net backend. and assign some playback and capture
ports

jackd.exe -R -S -d net -P4 -C4

here i started 4 playback and another 4 capture ports.
the -R flag is for real time (i could be wrong and it might be -r)
the -S flag will start the client in sync mode, only use the -S flag if you
have also started the server with the -S flag

afterwards, you can fire up jack control (The jackctl interface) and it
should automatically say that the server is running.

hope this helps!
nass

On Wed, Oct 17, 2012 at 10:58 PM, Oliver Larkin <[hidden]>wrote:

> Now I have successfully netjacked from a windows xp and linux virtual
> box guest, out to OSX 10.6 host. I have a windows 7 ultimate x64 VM
> and that just says waiting for master, even when I put the IP of the
> master/host in explicitly, and can ping the host.
>
> does anyone have netjack2 working on win 7 x64?
>
> On Wed, Oct 10, 2012 at 3:18 PM, Oliver Larkin <[hidden]>
> wrote:
> > It works on windows XP x86 however, OSX master, Windows slave
> >
> > On Tue, Oct 9, 2012 at 6:07 PM, Oliver Larkin <[hidden]>
> wrote:
> >> No unfortunately ;-(
> >>
> >> On Thu, Oct 4, 2012 at 3:21 PM, Stéphane Letz <[hidden]> wrote:
> >>> does the other ways works?
> >>>
> >>> (master on win7, slave on OSX...)
> >>>
> >>> Stéphane
> >>>
> >>> Le 4 oct. 2012 à 15:16, Oli Larkin a écrit :
> >>>
> >>>> thanks for the suggestion -
> >>>>
> >>>> doing what you said made a "Allow jackdmp to accept incoming
> connections..." dialogue in OSX. I allowed it, but even after that the
> Windows machine still says waiting for master.
> >>>>
> >>>> any ideas?
> >>>>
> >>>> thanks again,
> >>>>
> >>>> oli
> >>>>
> >>>> On 3 Oct 2012, at 18:40, Stéphane Letz wrote:
> >>>>
> >>>>> Try to put explicit IP of the master in the slave, so;
> >>>>>
> >>>>> jackd -d net -a MASTER_IP
> >>>>>
> >>>>> Stéphane
> >>>>>
> >>>>> Le 3 oct. 2012 à 12:38, Oli Larkin a écrit :
> >>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> thanks. I installed those versions but I still can't get the
> windows client to see the OSX master.
> >>>>>>
> >>>>>> I am doing the following:
> >>>>>>
> >>>>>> 1) launch jackpilot on mac 10.68 machine
> >>>>>> 2) type jack_load netmanager in command prompt on mac
> >>>>>> 3) launch Jack NetDriver from start menu on win7 x64 machine
> >>>>>> 4) launch Jack Control on win7 machine
> >>>>>>
> >>>>>> on windows it still says waiting for master. I've tried disabling
> the windows firewall - no joy.
> >>>>>>
> >>>>>> This is on a wired university LAN. Should I test some ports or put
> in explicit IP address for the master?
> >>>>>>
> >>>>>> cheers,
> >>>>>>
> >>>>>> oli
> >>>>>>
> >>>>>>
> >>>>>> On 29 Sep 2012, at 17:57, Stéphane Letz wrote:
> >>>>>>
> >>>>>>> Try latest 1.9.9 on WIndows 7:
> >>>>>>>
> >>>>>>> https://dl.dropbox.com/u/28869550/Jack_v1.9.9_64_setup.exe
> >>>>>>>
> >>>>>>> with the beta of 0.90 on OSX :
> >>>>>>>
> >>>>>>> http://www.grame.fr/~letz/JackOSX.0.90b8.zip
> >>>>>>>
> >>>>>>> Stéphane
> >>>>>>>
> >>>>>>> Le 29 sept. 2012 à 16:04, Oli Larkin a écrit :
> >>>>>>>
> >>>>>>>> Hi,
> >>>>>>>>
> >>>>>>>> I have been successfully netjacking between macs running 10.68 /
> jackosx 0.89. Now I would like to netjack from a windows 7 machine.
> >>>>>>>>
> >>>>>>>> I launch the Jack NetDriver item in the start menu and it appears
> to run OK but doesn't see the server (on a mac) - i get no outputs in
> qjackctl's connections window. Are there any other commands I need to use?
> Another mac on the network can connect to the server.
> >>>>>>>>
> >>>>>>>> thanks,
> >>>>>>>>
> >>>>>>>> oli
> >>>>>>>> 
> >>>>>>>> Jack-Devel mailing list
> >>>>>>>> [hidden]
> >>>>>>>> http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>
> 
> Jack-Devel mailing list
> [hidden]
> http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org
>

1350565525.4453_0.ltw:2,a <CADgchnux_qmjnEZgh1K6UGttq8Ks88Q=W-KVWqar8V7y2fau4w at mail dot gmail dot com>