Re: [Jack-Devel] can't connect audio between two computers

nope, still waiting for a master...
should i do a netstat on the server or smth? just to check if it is
listening on udp port 19000
should I try other things of this sort?



On Wed, Sep 5, 2012 at 3:12 PM, Stéphane Letz <[hidden]> wrote:

>
> Le 5 sept. 2012 à 14:04, Athanasios Silis a écrit :
>
> > hello everyone again,
> > i'm afraid i'll have to bother you once again about transporting sound
> between 2 pcs.
> >
> > So I went ahead and compiled the jack2 (jackdmp) for my jack master pc
> as well.
> > So now I have at both ends jack2 running ( slackware linux 32bit jack
> master, and a win7-64bit jack slave ).
> > There is no firewall run on any of these 2 pcs. (there is a firewall
> running on a gateway pc, but i pressume a multicast packet you still be
> able to fly through the intranet. correct?)
> >
> > once both jack2 where running, i followed the netjack2 wiki
> http://trac.jackaudio.org/wiki/WalkThrough/User/NetJack2
> > so i start the Net manager as
> >
> > 'jack_load netmanager' in the jack server and get the output:
> >
> > nass@starbase:~$ jack_load netmanager
> > netmanager is running.
> > client name = netmanager
> >
> > which is good news i guess (no netjack capture/playback ports appear
> quite yet - but i guess thats expected).
> >
> > Then I go to the client and try run the following command from a DOS
> prompt:
> >
> > C:\Program Files (x86)\Jack>jackd.exe -R -d net
> >
> > and I get the output
> >
> > jackdmp 1.9.9
> > Copyright 2001-2005 Paul Davis and others.
> > Copyright 2004-2012 Grame.
> > jackdmp comes with ABSOLUTELY NO WARRANTY
> > This is free software, and you are welcome to redistribute it
> > under certain conditions; see the file COPYING for details
> > Drivers/internals found in : C:\Windows
> > Drivers/internals found in : C:\Windows
> > JACK server starting in realtime mode with priority 10
> > InitTime : multimedia timer resolution set to 1 milliseconds
> > MMCSS API not used...
> > NetDriver started in async mode without Master's transport sync.
> > Waiting for a master...
> >
> > AS such the client again, doesn't appear on the server side.....
> >
> > Any suggestions?
> > Has anydoby managed to connect these 2 systems? (a linux master and a
> windows slave that is? )
> >
> > Thank you in advance for your help
> > nass
> >
>
>
> On client side, try to use the -a option to explicitly set the IP of the
> master, like:
>
> C:\Program Files (x86)\Jack>jackd.exe -R -d net  -a "IP_OF_THE_MASTER"
>
> Stéphane

1346848168.6330_0.ltw:2,a <CADgchnsP517Yad4kXbRra0XhQLcFWJGrBUADtWzo-ggCmN=uaQ at mail dot gmail dot com>