Re: [Jack-Devel] Why does jack change the sampling rate?
Paul,
Thanks for the interpretation. It has really changed some things for me. I
wanted to run this by you.
I ran the following command: lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
I also had the system generate a report of all sound related devices on my
machine. Attached is a list.
Without having to get a new card, is there anything I can do to get jack to
capture at a sample rate of 8khz, mono and using 16 or 8 bit samples?
Thanks a lot
I am using an HDA Intel sound card on a laptop. Would you have any
recommendations of a
On Mon, Jun 25, 2012 at 2:48 PM, Paul Davis <[hidden]>wrote:
>
>
> On Mon, Jun 25, 2012 at 5:20 PM, Eric Renrut <[hidden]> wrote:
>
>> Hi,
>>
>> I am starting daemon with the following:
>>
>> jackd -T-v -d alsa -d hw:0 -p 256 -r 8000 -S
>>
>>
>> Below I have added what jack is telling me. I see where it is telling me
>> that is configuring the card for a sample rate of 8000(configuring for
>> 8000Hz, period = 256 frames (32.0 ms), buffer = 2 periods). I see where
>> it changes it to 44100 as well.
>>
>> I am starting qjacktl with the same parameters(or as close as I can get
>> it), and it is reporting the sampling rate to be 44100.
>>
>
> you have a device that does not support 8kHz, and JACK told ALSA to use
> the closest available value.
>
* Attachment: 'Hardware Settings.odt'
content-type: application/vnd.oasis.opendocument.text
1340853245.17191_0.ltw:2,a <CAFoh_9WrXdjgsKeK3Y=E=008MdGTfHYdXUszs+D732kC1Wt1sg at mail dot gmail dot com>